AMPLIFICACION INALAMBRICA

 

Equipos de Amplificación Inalámbrica

Hi Power Output: 15w-60w
- Aluminum Bronze and ABS RESIN casing can stand up to strong crash.
- Great, Perfect design and contruction.
- It is suitable for bigger conference's room and outside broadcast.
- Supply SH-322/324 only or SH-322/324 with tripod.
- Can connect external battery 13.2V DC
AC Power cord can be stored under unit when
not using it.
Cod. 199 100

SH-321
AC Power cord can be stored under unit when
not using it.
Cod. 199 100

SH-322
Cod. 199 111

SH-324
Tripods are easy and convenient attached anywhere you are.
The characteristic of Volumm Speaker is wide compass and good sound effect.
Cod. 199 122

SH-120A
Portable Wireless Amplifier Convenient portable design.
No other accesories required

Wide Frequency Response ensures voice clarify with minimal distortion.
Housing made of ABS plastic.
VHF 200MHZ wireless system with quartz lock to ensure the highest stability.
The Frequency Stability is ±0.005% with temperature-compensation quartz control.
Wired or wireless recording. Amplifier with telescope antenna. LED low voltage indicator. WM-120 Transmitter can be attached to belt or carried in pocket.
Temperature does not affect its precision. Battery 9V (006P) for longer lifetime.
360o free adjustable clip on mike. Unidirectional condenser mike with excellent sound quality. Replace the antenna by revolving it off/on without opening the back of cabinet. SMT manufacturing double-layer FRP circuit board.
Wireless reciver circuit board. Insert mode for easy channel change.
AC 115V/230V - Voltage adjustment switch. AC power cord Storage.
Power cord can be stored inside when not using batteries. Battery compartment: UM-2 1.5VX6. Transmitting storage.
Cod. 199 087

 

SH-420
Lecture Amplifier
Material of top table is ABS RESIN Fantastic design.
Fashionable design. Human-engineering design.
With Goose Neck Microphone. Stable, light and efficient design ensures convenient transport.
Infrared ray volume control. Infrared ray remote-control.
Cod. 199 098

 
Specifications        
Item / Model SH- 120A SH-321/322/324 SH-360 SH-420
    AC-110V/22V (selectable), 60Hz    
Power Requirements DRY CELLS-6 pieces   EXTERNAL DC-10 to 6V  
  (UM-2 1.5VX6) CHARGE BATTERY    
    1.2A(1200mA)    
Power Output (RMS) 7W SH-321/SH-322/SH-324 40W 40W
    15W 30W 50W    
Frequency Response 220~20,000Hz 70~12,000Hz 70~15,000Hz 100~10,000Hz
IMPUTS Wired Mic 600W-54dBV MIC 1/2 600W-54dBV MIC 1/2  600W-54dBV GOOSE NECK MIC
    50dBV 600W    
    MIC-64dBV 600W    
  Auxiliary -22dBV 600W/500KW -20dBV 500KW -10dBV 20KW
Line out   OdBV 600W BRIDGE 0dBV 1KW 0dBV 10KW  
    IMPUT: -12dBV 50KW    
    OUTPUT: -12dBV 600W    
Speaker 16cm 10W/4W 16cm 15W/4W 20cm 40W/4W 16cm 15W/4WX4
  SH-321X1 SH-322X2      
  SH-324X4      
Aerial System   Rod aerial    
Receiving Sensitivity   More than 80dB (at 20dBV input)    
TUNER SECTION Signal to Noise Ratio More than 95dB (at 60dBV input)    
(PCB-R-120) Receiving System   Superheterodyne System
  Squelch Sensitivity 14dBV (0dB=1V)    
Intermediate Frequency   10.7MHz    
TRANSMITTER W/   Carrier Frequency Range: 160~250 MHz  
MICROPHONE (WM-120)   Spurious Harmonic: - 35dB    
    RF Power Output: 15 MW    
    Modulation Mode: FM20K    
    Operation Temperature: -10ºC~+50ºC    
    Power: DC 9V (006P)    
    Current Consumption: <20 MA    
Ambient Temperature Range -10 (14ºF) to 40ºC (104ºF) at AC/0ºC (32ºF) to 40ºC (104ºF) at DC
Dimensions (WxHxD) m/m 175x294x120 SH-321: 180x300x145 250x400x240 550x1080x432  
    SH-322: 180x510x145    
    SH-324: 180x940x145    
Weight 2,5kg SH-321: 4kg 9kg 12kg  
    SH-322: 6.5kg    
    SH-324: 11kg    
Finish ABS resin ABS resin ABS resin ABS resin    
    ALUMINUM    

Volver a índice de productos